- 2 stainless steel thimbles [fImbl] ensure that the climbing rope will move smoothly during work in the canopy.
- Friction values are only slightly higher than those with the pulleySAVER.
- 10 cm long and tapering longitudinal seam makes retrieving this saver easy.
- Easy to install from the ground, it closes the gap between the multiSAVER and the pulleySAVER.
- Diameter: 15 mm (11/32″)
- MBS: 4,000 daN (8,990 lbs)
- Replaceable parts: Ocean Polyester Loop, Retrievable Cone L
- Standards: EN 795B:1996, EN 795B:2012, ANSI Z133-2012″
You must be logged in to post a review.
Related Products
The RopeGuide TwinLine can be used in two ways. As a friction saver rope guide style anchor on a short, spliced eye sling (the Gravity Lab Sling with a sprung eye is ideal), or a long rope (10 to 12 mm diameter) in any suitable length with no need for end terminations.
The RopeGuide TwinLine can be used in two ways. As a friction saver rope guide style anchor on a short, spliced eye sling (the Gravity Lab Sling with a sprung eye is ideal), or a long rope (10 to 12 mm diameter) in any suitable length with no need for end terminations.
Weaver’s Leather Rope and cambium saver is a dependable and easy way to protect your climbing rope and tree bark from damage. Also known as the “Shoe” or horseshoe.
Weaver’s Leather Rope and cambium saver is a dependable and easy way to protect your climbing rope and tree bark from damage. Also known as the “Shoe” or horseshoe.
The All Gear Adjustable Friction Saver with aluminum adjustable ring helps reduce friction on your climbing line.
The All Gear Adjustable Friction Saver with aluminum adjustable ring helps reduce friction on your climbing line.
The pulleySAVER from Teufelberger and TreeMagineers epitomizes the evolution of the friction saver. The pulleySAVER can be used as anchor point on a tree and can configured four different ways: As swinging element in a double leg configuration, As choke hitch, Wound around in a double leg configuration, or Narrowed in a double leg configuration.
The pulleySAVER from Teufelberger and TreeMagineers epitomizes the evolution of the friction saver. The pulleySAVER can be used as anchor point on a tree and can configured four different ways: As swinging element in a double leg configuration, As choke hitch, Wound around in a double leg configuration, or Narrowed in a double leg configuration.
ArborMaster Friction Savers [patented] allow for easy installation and retrieval.
ArborMaster Friction Savers [patented] allow for easy installation and retrieval.
The TreeFork Friction Saver provides two differently sized and colored rings, designed to make installation and retrieval from the ground easier
The TreeFork Friction Saver provides two differently sized and colored rings, designed to make installation and retrieval from the ground easier
Also commonly known as the “Anaconda” this simple electrical conduit is a rope friction saver and oh so much more.
Also commonly known as the “Anaconda” this simple electrical conduit is a rope friction saver and oh so much more.
Conical leading edge guides cone through anchor components reliably and with little resistance, then locates in retrieval element. Max diameter tailored to a selection of common tree care anchor components/assemblies.
Conical leading edge guides cone through anchor components reliably and with little resistance, then locates in retrieval element. Max diameter tailored to a selection of common tree care anchor components/assemblies.
Reviews
There are no reviews yet.