CMI Stainless Steel Shackle Pulley
$86.78
The CMI RP144 Shackle Pulley is both strong and compact. Weighing only 3 oz and it’s among the smallest load-bearing pulleys available to our field.
| Color | Stainless |
|---|
You must be logged in to post a review.
Related Products
DMM Pinto Pulleys have a hot forged frame 7075 T6 aluminum for exceptional strength to weight ratio. The Pinto Rig (Purple) (Large) Rigging Pulley
carries 6000-2RS series ball bearings. The Red (small) Pinto pulley carries an oilite bushing.
DMM Pinto Pulleys have a hot forged frame 7075 T6 aluminum for exceptional strength to weight ratio. The Pinto Rig (Purple) (Large) Rigging Pulley
carries 6000-2RS series ball bearings. The Red (small) Pinto pulley carries an oilite bushing.
Pairs with ISC Rope Wrench. Inspected/proof tested; individual numbering
Pairs with ISC Rope Wrench. Inspected/proof tested; individual numbering
The new geometryof the Eccentric Pulley offers greater efficiency combined with a striking aesthetic. The ‘pushing plates’ will advance your friction hitch earlier and the optimized fairlead flairs direct rope towards the sheave when tending slack. Also features a large sheave with an efficient roller bearing and a stainless steel axle.
The new geometryof the Eccentric Pulley offers greater efficiency combined with a striking aesthetic. The ‘pushing plates’ will advance your friction hitch earlier and the optimized fairlead flairs direct rope towards the sheave when tending slack. Also features a large sheave with an efficient roller bearing and a stainless steel axle.
Ideal for Arborist rigging where two independent tie-ins are required.
Ideal for Arborist rigging where two independent tie-ins are required.
DMM Pinto Pulley Spacers are an essential component for Pinto and Pinto Rig applications where textile connecting elements tend to compress the side plates.
DMM Pinto Pulley Spacers are an essential component for Pinto and Pinto Rig applications where textile connecting elements tend to compress the side plates.
The Shackle Swivel saves valuable headspace by allowing you to connect webbing, eyes or thimbles directly to the swivel without a carabiner. The steel shackle bolt increases the longevity of the swivel when connected to other steel components
The Shackle Swivel saves valuable headspace by allowing you to connect webbing, eyes or thimbles directly to the swivel without a carabiner. The steel shackle bolt increases the longevity of the swivel when connected to other steel components
The DMM Triple Attachment Pulley (Hitch Climber Pulley) combines the high efficiency of our pulleys with a small three hole rigging plate to give an extremely versatile piece of equipment.
The DMM Triple Attachment Pulley (Hitch Climber Pulley) combines the high efficiency of our pulleys with a small three hole rigging plate to give an extremely versatile piece of equipment.
CMI’s RP110 Micro Pulley is primarily used as a slack tender for your friction hitch on a traditional system or on your lanyard. The sideplates swing open to allow placement anywhere on the line. The aluminum cheeks plates designed to work with a carabiner has a 7/8″ hole. A double lock nut holds everything together on an stainless steel axle and 1 1/4″ Aluminum sheave bushing.
CMI’s RP110 Micro Pulley is primarily used as a slack tender for your friction hitch on a traditional system or on your lanyard. The sideplates swing open to allow placement anywhere on the line. The aluminum cheeks plates designed to work with a carabiner has a 7/8″ hole. A double lock nut holds everything together on an stainless steel axle and 1 1/4″ Aluminum sheave bushing.
The HYDRA is a triple attachment pulley which features a swivel-top connection to facilitate the pulley’s use on the saddle bridge, and for use in climbing systems. Rubber o-rings line the connection points to assist in holding carabiners tightly to avoid dangerous cross-loading.
The HYDRA is a triple attachment pulley which features a swivel-top connection to facilitate the pulley’s use on the saddle bridge, and for use in climbing systems. Rubber o-rings line the connection points to assist in holding carabiners tightly to avoid dangerous cross-loading.
DMM Axis Swivels have been designed to be smooth, compact and incredibly strong. Made from hot forged, CNC machined bodies from heat treated, 7075 T6 aluminum alloy, with large bearings and heat treated, stainless steel axles.
DMM Axis Swivels have been designed to be smooth, compact and incredibly strong. Made from hot forged, CNC machined bodies from heat treated, 7075 T6 aluminum alloy, with large bearings and heat treated, stainless steel axles.
A multi-aperture device specifically designed for SRT and DdRT
A multi-aperture device specifically designed for SRT and DdRT
Reviews
There are no reviews yet.